TLHY5800, tlhg5800, tlhp5800 www.vishay.com vishay semiconductors rev. 1.8, 29-apr-13 1 document number: 83013 for technical ques tions, contact: led@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 high efficiency led, ? 5 mm untinted non-diffused package description the tlh.5800 series was developed for standard applications which need a very small radiation angle or a very high luminous intensity. it is housed in a 5 mm untinted non-diffused plastic package. the very small viewing angle of these devices provide a very high luminous intensity. the yellow and green leds ar e categorized in luminous intensity and additionally in wavelength groups. that allows users to assemble leds with uniform appearance. product group and package data ? product group: led ?package: 5 mm ? product series: standard ? angle of half intensity: 4 featrues ? standard t-1? package ? small mechanical tolerances ? suitable for dc and high peak current ? very small viewing angle ? very high intensity ? luminous intensity categorized ? yellow and green color categorized ? esd-withstand voltage up to 2 kv according to jesd22-a114-b ? material categorization: for definitions of compliance please see www.vishay.com/doc?99912 applications ? status lights ? off/on indicator ? lightpipe ? outdoor display ? medical instruments ? maintenance lights ?legend lights ? ? 19223 parts table part color luminous intensity (mcd) at i f (ma) wavelength (nm) at i f (ma) forward voltage (v) at i f (ma) technology min. typ. max. min. typ. max. min. typ. max. TLHY5800 yellow 100 250 - 20 581 - 594 10 - 2.4 3 20 gaasp on gap tlhg5800 green 430 700 - 20 562 - 575 10 - 2.4 3 20 gap on gap tlhp5800 pure green 25 85 - 20 555 - 565 10 - 2.4 3 20 gap on gap absolute maximum ratings (t amb = 25 c unless otherwise specified) ? TLHY5800, tlhg5800, tlhp5800 parameter test condition symbol value unit reverse voltage v r 6v dc forward current t amb ? 65 c i f 30 ma surge forward current t p ? 10 s i fsm 1a power dissi pation t amb ? 65 c p v 100 mw junction temperature t j 100 c operating temperature range t amb - 40 to + 100 c storage temperature range t stg - 55 to + 100 c soldering temperature t ? 5 s, 2 mm from body t sd 260 c thermal resistance junction/ambient r thja 350 k/w
TLHY5800, tlhg5800, tlhp5800 www.vishay.com vishay semiconductors rev. 1.8, 29-apr-13 2 document number: 83013 for technical ques tions, contact: led@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 note (1) in one packing unit i vmin. /i vmax. ? 0.5 note (1) in one packing unit i vmin. /i vmax. ? 0.5 note (1) in one packing unit i vmin. /i vmax. ? 0.5 note ? luminous intensity is tested at a current pulse duration of 25 ms and an accuracy of 11 %. ? the above type numbers represent the order groups which include only a few brightness groups. only one group will be shipped on each bag (there will be no mixing of two groups on each bag). ? in order to ensure availabi lity, single brightness grou ps will not be orderable. ? in a similar manner for colors where wavelength groups are measured and binned, single wa velength groups will be shipped in any one bag. ? in order to ensure availabi lity, single wavelength grou ps will not be orderable. optical and electrical characteristics (t amb = 25 c, unless otherwise specified) ? TLHY5800, yellow parameter test condition symbol min. typ. max. unit luminous intensity (1) i f = 20 ma i v 100 250 - mcd dominant wavelength i f = 10 ma ? d 581 - 594 nm peak wavelength i f = 10 ma ? p - 585 - nm angle of half intensity i f = 10 ma ? - 4-deg forward voltage i f = 20 ma v f -2.43 v reverse voltage i r = 10 a v r 615- v junction capacitance v r = 0 v, f = 1 mhz c j -50-pf optical and electrical characteristics (t amb = 25 c, unless otherwise specified) ? tlhg5800, green parameter test condition symbol min. typ. max. unit luminous intensity (1) i f = 20 ma i v 430 700 - mcd dominant wavelength i f = 10 ma ? d 562 - 575 nm peak wavelength i f = 10 ma ? p - 565 - nm angle of half intensity i f = 10 ma ? - 4-deg forward voltage i f = 20 ma v f -2.43 v reverse voltage i r = 10 a v r 615- v junction capacitance v r = 0 v, f = 1 mhz c j -50-pf optical and electrical characteristics (t amb = 25 c, unless otherwise specified) ? tlhp5800, pure green parameter test condition symbol min. typ. max. unit luminous intensity (1) i f = 20 ma i v 25 85 - mcd dominant wavelength i f = 10 ma ? d 555 - 565 nm peak wavelength i f = 10 ma ? p - 555 - nm angle of half intensity i f = 10 ma ? - 4-deg forward voltage i f = 20 ma v f -2.43 v reverse voltage i r = 10 a v r 615- v junction capacitance v r = 0 v, f = 1 mhz c j -50-pf luminous intensity classification group light intensity (mcd) standard min. max. bb 430 860 cc 575 1150 dd 750 1500 ee 1000 2000 ff 1350 2700
TLHY5800, tlhg5800, tlhp5800 www.vishay.com vishay semiconductors rev. 1.8, 29-apr-13 3 document number: 83013 for technical ques tions, contact: led@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 typical characteristics (t amb = 25 c, unless otherwise specified) fig. 1 - forward current vs. ambient temperature fig. 2 - forward current vs. pulse length fig. 3 - relative luminous in tensity vs. angular displacement fig. 4 - forward current vs. forward voltage fig. 5 - relative luminous in tensity vs. ambient temperature fig. 6 - relative luminous intens ity vs. forward current/duty cycle 0 10 20 30 40 60 95 10046 50 i f - forward current (ma) 0100 80 60 40 20 t amb - ambient temperature (c) 0.01 0.1 1 10 1 10 100 1000 10 000 100 95 10025 0.02 0.05 0.1 0.2 1 0.5 t amb 85 c t p /t = 0.01 i f - forward current (ma) t p - pulse length (ms) 0.4 0.2 95 10022 0.6 0.9 0.8 0 30 10 20 40 50 60 70 80 0.7 1.0 i v rel - relative radiant intensity ? - angular displacement 0.1 1 10 100 1000 10 8 6 4 2 0 95 10030 v f - forward voltage (v) i f - forward current (ma) yellow t p /t = 0.001 t p = 10 s 0 0 0.4 0.8 1.2 1.6 95 10031 20 40 60 80 100 i v rel - relative luminous intensity t amb - ambient temperature (c) yellow i f = 10 ma yellow 10 20 50 100 200 0 0.4 0.8 1.2 1.6 2.4 95 10260 500 0.5 0.2 0.1 0.05 0.02 1 i f (ma) t p /t i spec - specific luminous intensity 2.0
TLHY5800, tlhg5800, tlhp5800 www.vishay.com vishay semiconductors rev. 1.8, 29-apr-13 4 document number: 83013 for technical ques tions, contact: led@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 fig. 7 - relative luminous intensity vs. forward current fig. 8 - relative intensity vs. wavelength fig. 9 - forward current vs. forward voltage fig. 10 - relative luminous intensity vs. ambient temperature fig. 11 - specific luminous intensity vs. forward current fig. 12 - relative luminous intensity vs. forward current yellow i f - forward current (ma) 100 0.1 1 10 95 10033 i v rel - relative luminous intensity 10 1 0.01 550 570 590 610 630 0 0.2 0.4 0.6 0.8 1.2 650 95 10039 - wavelength (nm) 1.0 yellow i rel - relative intensity 0.1 1 10 100 1000 10 8 6 4 2 0 95 10034 v f - forward voltage (v) i f - forward current (ma) green t p /t = 0.001 t p = 10 s 0 0.4 0.8 1.2 1.6 95 10035 i v rel - relative luminous intensity green i f = 10 ma t amb - ambient temperature (c) 20 40 60 80 0100 10 20 50 100 200 0 0.4 0.8 1.2 1.6 2.4 95 10263 500 2.0 green i spec - specific luminous intensity i f (ma) 0.5 0.2 0.1 0.05 0.02 1 t p /t i f - forward current (ma) 100 green 0.1 1 10 95 10037 i v rel - relative luminous intensity 10 1
TLHY5800, tlhg5800, tlhp5800 www.vishay.com vishay semiconductors rev. 1.8, 29-apr-13 5 document number: 83013 for technical ques tions, contact: led@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 fig. 13 - relative in tensity vs. wavelength fig. 14 - forward current vs. forward voltage fig. 15 - relative luminous in tensity vs. ambi ent temperature fig. 16 - specific luminous intensity vs. forward current fig. 17 - relative luminous intensity vs. forward current fig. 18 - relative intensity vs. wavelength 520 540 560 580 600 0 0.2 0.4 0.6 0.8 1.2 620 95 10038 - wavelength (nm) 1.0 green i rel - relative intensity 02 0.1 1 10 100 5 95 9988 pure green i f - forward current (ma) v f - forward voltage (v) 13 4 0 0.4 0.8 1.2 1.6 2.0 95 9991 pure green i v rel - relative luminous intensity t amb - ambient temperature (c) 0100 80 60 40 20 95 10261 10 1000 100 0 0.4 0.8 1.2 1.6 2.4 2.0 pure green i spec - specific luminous flux i f - forward current (ma) 0.01 0.1 1 10 100 10 1 95 9998 pure green i v rel - relative luminous intensity i f - forward current (ma) 500 520 540 560 580 0 0.2 0.4 0.6 0.8 1.2 600 95 10325 1.0 pure green - wavelength (nm) i rel - relative intensity
TLHY5800, tlhg5800, tlhp5800 www.vishay.com vishay semiconductors rev. 1.8, 29-apr-13 6 document number: 83013 for technical ques tions, contact: led@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 package dimensions in millimeters 95 11476 2.54 nom. 8.7 0.3 ? 5.5 0.15 (4.9) 12.7 0.3 35.7 0.55 1 min. 1.1 0.25 0.5 + 0.15 - 0.05 7.7 0.15 c a parabolic lens area not plane ? 5 0.15 < 0.7 0.5 + 0.15 - 0.05 specifications according to din technical drawings drawing-no.: 6.544-5310.01-4 issue: 4; 19.05.09
legal disclaimer notice www.vishay.com vishay revision: 02-oct-12 1 document number: 91000 disclaimer all product, product specifications and data are subject to change without notice to improve reliability, function or design or otherwise. vishay intertechnology, inc., its affiliates, agents, and employee s, and all persons acting on it s or their behalf (collectivel y, vishay), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any o ther disclosure relating to any product. vishay makes no warranty, repres entation or guarantee regarding the suitabilit y of the products for any particular purpose or the continuing production of any product. to the maximum extent permitted by applicable law, vi shay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation specia l, consequential or incidental damages, and (iii) any and all i mplied warranties, including warra nties of fitness for particular purpose, non-infringement and merchantability. statements regarding the suitability of products for certain type s of applications are based on vishays knowledge of typical requirements that are often placed on vishay products in generic applications. such statements are not binding statements about the suitability of products for a particular application. it is the customers responsib ility to validate that a particu lar product with the properties descri bed in the product specification is suitable fo r use in a particular application. parameters provided in datasheets and/or specification s may vary in different applications an d performance may vary over time. all operating parameters, including typical pa rameters, must be validated for each customer application by the customers technical experts. product specifications do not expand or otherwise modify vish ays terms and condit ions of purchase, including but not limited to the warranty expressed therein. except as expressly indicate d in writing, vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the vi shay product could result in personal injury or death. customers using or selling vishay products not expressly indicated for use in such applications do so at their own risk. pleas e contact authorized vishay personnel to ob tain written terms and conditions regarding products designed for such applications. no license, express or implied, by estoppel or otherwise, to any intellectual prope rty rights is granted by this document or by any conduct of vishay. product names and markings noted herein may be trad emarks of their respective owners. material category policy vishay intertechnology, inc. hereby certi fies that all its products that are id entified as rohs-compliant fulfill the definitions and restrictions defined under directive 2011/65/eu of the euro pean parliament and of the council of june 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (eee) - recast, unless otherwis e specified as non-compliant. please note that some vishay documentation may still make reference to rohs directive 2002/95/ ec. we confirm that all the products identified as being compliant to directive 2002 /95/ec conform to directive 2011/65/eu. vishay intertechnology, inc. hereby certifi es that all its products that are identified as ha logen-free follow halogen-free requirements as per jedec js709a stan dards. please note that some vishay documentation may still make reference to the iec 61249-2-21 definition. we co nfirm that all the products identified as being compliant to iec 61249-2-21 conform to jedec js709a standards.
|
